Introduction

Ba An HDPE straight pipes (BSP) are manufactured from high-density HDPE, ensuring safety, durability, and efficiency in both installation and use. The product is available in various sizes (with outer diameters ranging from D25 to D400) and is widely used in both electrical projects (for protecting underground cables) and water projects (as water conveyance pipes), specifically:

  • BSP for Electrical Cables Protection:

The BSP for electrical cable protection has a smooth inner surface, minimizing friction when threading cables.

  • BSP for Water Conveyance:

The BSP for water conveyance has high sealing capability, is non-corrosive, does not rust, and can withstand high pressure, ensuring the safety of water projects.

The BSP products for both electrical cables protection and water conveyance meet Vietnamese and International technical standards such as ISO 4427:2007, TCVN 7305:2008, DIN 8074:2011, DIN 8075:2011, and TCVN 8699:2011.

Specification Table:

 SttOutside
diameter
nominal
size (mm)
Length
(m)
Outside
diameter
(mm)
Maximum
ovality
(mm)
Thickness
PN 16
(mm)
Thickness
PN 12,5
(mm)
Thickness
PN 10
(mm)
Thickness
PN 8
(mm)
Thickness
PN 6
(mm)
  Typical Test  
1
2020020 + 0,31,22,0 + 0,3
225
20025 + 0,31,22,3 + 0,42,0 + 0,3Download
332
20032 + 0,31,33,0 + 0,42,4 + 0,42,0 + 0,3Download
44020040 + 0,41,43,7 + 0,53,0 + 0,52,4 + 0,42,0 + 0,3Download
55020050 + 0,41,44,6 + 0,63,7 + 0,53,0 + 0,42,4 + 0,42,0 + 0,3Download
66310063 + 0,41,55,8 + 0,74,7 + 0,63,8 + 0,53,0 + 0,4 2,5 + 0,4Download
775
10075 + 0,51,66,8 + 0,85,6 + 0,74,5 + 0,63,6 + 0,52,9 + 0,4Download
890
5090 + 0,61,88,2 + 1,06,7 + 0,85,4 + 0,74,3 + 0,6 33,5 + 0,5Download
9110
6110 + 0,72,210,0 + 1,18,1 + 1,06,6 + 0,85,3 + 0,74,2 + 0,6Download
10125
6125 + 0,82,511,4 + 1,39,2 + 1,17,4 + 0,96,0 + 0,74,8 + 0,6Download
11140
6140 + 0,92,812,7 + 1,410,3 + 1,28,3 + 1,06,7 + 0,85,4 + 0,7Download
12160
6160 + 1,03,214,6 + 1,6 11,8 + 1,39,5 + 1,17,7 + 0,96,2 + 0,8Download
13180
6180 + 1,13,616,4 + 1,813,3 + 1,510,7 + 1,2 8,6 + 1,06,9 + 0,8Download
142006200 + 1,24,018,2 + 2,014,7 + 1,611,9 + 1,39,6 + 1,1 7,7 + 0,9Download
15225
6225 + 1,44,520,5 + 2,216,6 + 1,813,4 + 1,5 10,8 + 1,28,6 + 1,0Download
162506250 + 1,55,018,4 + 1,614,8 + 1,611,9 + 1,39,6 + 1,1Download
172806280 + 1,79,820,6 + 2,216,6 + 1,813,4 + 1,510,7 + 1,2Download
183156315 + 1,911,123,2 + 2,518,7 + 2,015,0 + 1,612,1 + 1,4Download
193556355 + 2,012,526,1 + 2,721,1 + 2,316,9 + 1,713,6 + 1,5
204006400 + 2,414,029,4 + 3,123,7 + 2,516,9 + 1,715,3 + 1,7Download

CONNECT PIPE

Pipe connectors are used to join pipes and protect the mechanical integrity; waterproofs the connection between two HDPE straight pipes.

PIPE END CAP (PIPE CAP)

Pipe end caps, also known as pipe cap, are made from uniform material and used to prevent the intrusion of dirt, foreign objects, water, and insects before cables are threaded, as well as during transportation and storage.

Butt fusion heat welding of HDPE pipes

 


HDPE Flexible pipes

The product is configured from two parts: the shell is a Ba An HDPE twisted plastic pipe in accordance with ISO 8699:2011. The pipe includes many different types from 02 to 12 cores, core pipe sizes from 12mm to 48mm, pipe sizes case from 65mm to 160mm.
BCP pipes are structured to create a twisted ribbed shell with a comfortable torque to enhance the ability to withstand soil pressure as well as large load operations. The inside of the pipe is coated with Silicon to minimize friction speed, fully exploiting to increase flexible reinforcement of pipes while constructing fiber optic cables and providing bypasses.

Technical Data Sheet

STTHDPE pipe typeNominal DiameterCentral outside diameter
average (mm)
Pipe wall thickness (mm)Nominal pressure (bar)
1D20x 2.0mmD2020 + 0,32,0 + 0,3PN 16
2D25 x 2.0mmD2525 + 0,3 2,0 + 0,3PN 12,5
3D25 x 2.3mmD2525 + 0,3 2,3 + 0,4PN 16
4D32 x 2.0mmD3232 + 0,3 2,0 + 0,3PN 10
5D32 x 2.4mmD3232 + 0,3 2,4 + 0,4PN 12,5
6D32 x 3.0mmD3232 + 0,3 3,0 + 0,4PN 16
7D40 x 2.0mmD4040 + 0,4 2,0 + 0,3PN 8
8D40 x 2.4mmD4040 + 0,4 2,4 + 0,4PN 10
9D40 x 3.0mmD4040 + 0,4 3,0 + 0,5PN 12,5
10D40 x 3.7mmD4040 + 0,4 3,7 + 0,5PN 16
11D50 x 2.4mmD5050 + 0,4 2,4 + 0,4PN 8
12D50 x 3.0mmD5050 + 0,4 3,0 + 0,4PN 10
13D50 x 3.7mmD5050 + 0,4 3,7 + 0,5PN 12,5
14D50 x 4.6mmD5050 + 0,4 4,6 + 0,6PN 16
15D63 x 3.0mmD6363 + 0,4 3,0 + 0,4PN 8
16D63 x 3.8mmD6363 + 0,4 3,8 + 0,5PN 10
17D63 x 4.7mmD6363 + 0,4 4,7 + 0,6PN 12,5
18D63 x 5.8mmD6363 + 0,4 5,8 + 0,7PN 16
19D75 x 3.6mmD7575 + 0,53,6 + 0,5PN 8
20D75 x 4.5mmD7575 + 0,54,5 + 0,6PN 10
21D75 x 5.6mmD7575 + 0,55,6 + 0,7PN 12,5
22D75 x 6.8mmD7575 + 0,56,8 + 0,8PN 16
23D90 x 4.3mmD9090 + 0,64,3 + 0,6PN 8
24D90 x 5.4mmD9090 + 0,65,4 + 0,7PN 10
25D90 x 6.7mmD9090 + 0,66,7 + 0,8PN 12,5
26D90 x 8.2mmD9090 + 0,68,2 + 1,0PN 16
27D110 x 4.2mmD110110 + 0,74,2 + 0,6PN 6
28D110 x 5.3mmD110110 + 0,75,3 + 0,7PN 8
29D110 x 6.6mmD110110 + 0,76,6 + 0,8PN 10
30D110 x 8.1mmD110110 + 0,78,1 + 1,0PN 12,5
31D110 x 10.0mmD110110 + 0,710,0 + 1,1PN 16
32D125 x 4.8mmD125125 + 0,84,8 + 0,6PN 6
33D125 x 6.0mmD125125 + 0,86,0 + 0,7PN 8
34D125 x 7.4mmD125125 + 0,87,4 + 0,9PN 10
35D125 x 9.2mmD125125 + 0,89,2 + 1,1PN 12,5
36D125 x 11.4mmD125125 + 0,811,4 + 1,3PN 16
37D140 x 5.4mmD140140 + 0,95,4 + 0,7PN 6
38D140 x 6.7mmD140140 + 0,96,7 + 0,8PN 8
39D140 x 8.3mmD140140 + 0,98,3 + 1,0PN 10
40D140 x 10.3mmD140140 + 0,910,3 + 1,2PN 12,5
41D140 x 12.7mmD140140 + 0,912,7 + 1,4PN 16
42D160 x 6.2mmD160160 + 1,06,2 + 0,8PN 6
43D160 x 7.7mmD160160 + 1,07,7 + 0,9PN 8
44D160 x 9.5mmD160160 + 1,09,5 + 1,1PN 10
45D160 x 11.8mmD160160 + 1,011,8 + 1,3PN 12,5
46D160 x 14.6mmD160160 + 1,014,6 + 1,6PN 16
47D180 x 6.9mmD180180 + 1,16,9 + 0,8PN 6
48D180 x 8.6mmD180180 + 1,18,6 + 1,0PN 8
49D180 x 10.7mmD180180 + 1,110,7 + 1,2PN 10
50D180 x 13.3mmD180180 + 1,113,3 + 1,5PN 12,5
51D180 x 16.4mmD180180 + 1,116,4 + 1,8PN 16
52D200 x 7.7mmD200200 + 1,27,7 + 0,9PN 6
53D200 x 9.6mmD200200 + 1,29,6 + 1,1PN 8
54D200 x 11.9mmD200200 + 1,211,9 + 1,3PN 10
55D200 x 14.7mmD200200 + 1,214,7 + 1,6PN 12,5
56D200 x 18.2mmD200200 + 1,218,2 + 2,0PN 16
57D225 x 8.6mmD225225 + 1,48,6 + 1,0PN 6
58D225 x 10.8mmD225225 + 1,410,8 + 1,2PN 8
59D225 x 13.4mmD225225 + 1,413,4 + 1,5PN 10
60D225 x 16.6mmD225225 + 1,416,6 + 1,8PN 12,5
61D225 x 20.5mmD225225 + 1,420,5 + 2,2PN 16
62D250 x 9.6mmD250250 + 1,59,6 + 1,1PN 6
63D250 x 11.9mmD250250 + 1,511,9 + 1.3PN 8
64D250 x 14.8mmD250250 + 1,514,8 + 1,6PN 10
65D250 x 18.4mmD250250 + 1,518,4 + 2,0PN 12,5
66D250 x 22.7mmD250250 + 1,522,7 + 2,4PN 16
67D280 x 10.7mmD280280 + 1,710,7 + 1,2PN 6
68D280 x 13.4mmD280280 + 1,713,4 + 1,5PN 8
69D280 x 16.6mmD280280 + 1,716,6 + 1,8PN 10
70D280 x 20.6mmD280280 + 1,720,6 + 2,2PN 12,5
71D280 x 25.4mmD280280 + 1,725,4 + 2,7PN 16
72D315 x 12.1mmD315315 + 1,9 12,1 + 1,4PN 6
73D315 x 15.0mmD315315 + 1,9 15,0 + 1,6PN 8
74D315 x 18.7mmD315315 + 1,9 18,7 + 2,0PN 10
75D315 x 23.2mmD315315 + 1,9 23,2 + 2,5PN 12,5
76D355 x 13.6mm D355 355 + 2,213,6 + 1,5PN 6
77D355 x 16.9mmD355355 + 2,216,9 + 1,8PN 8
78D355 x 21.1mmD355355 + 2,221,1 + 2,3PN 10
79D355 x 26.1mm D355 355 + 2,2 26,1 + 2,8 PN 12,5
80400 x 15.3mmD400400 + 2.415,3 + 1,7PN 6
81400 x 19.1mmD400400 + 2.419,1 + 2,1PN 8
82400 x 23.7mmD400400 + 2.423,7 + 2,5PN 10
83400 x 29.4mmD400400 + 2.429,4 + 3,1PN 12,5

CONNECT PIPE

Pipe connectors are used to join pipes and protect the mechanical integrity; waterproofs the connection between two HDPE straight pipes.

PIPE END CAP (PIPE CAP)

Pipe end caps, also known as pipe cap, are made from uniform material and used to prevent the intrusion of dirt, foreign objects, water, and insects before cables are threaded, as well as during transportation and storage.

Butt fusion heat welding of HDPE pipes