Product code/Designation: KE-
Used to install BFP pipes with electrical cabinets.
When ordering, please clearly state: KE-…
For example: Buy BFP clamp to install with BFP 100, write: KE-100.
Note:
The diameter of the machined hole on the wall of the electrical cabinet must match the diameter of the BFP clamp (See table 15). When machining these holes, specialized tools must be used.
From BFP tubes 125 to 200, do not use the BFP clamp but use the corresponding flare button (see Flare button on page 26 of the Accessories section).
BFP clamps are manufactured to order.
Completion time is 20 days.
| Product code |
Nominal diameter |
Gasket |
Connecting pipe | Hole diameter
on the electrical cabinet |
||
|---|---|---|---|---|---|---|
| D1 (mm) | D1 (mm) | L1 (mm) | D2 (mm) | L2 (mm) | ||
| KE-25 | 25 | 55 ± 2 | 13 ± 2 | 40 ± 2 | 90 ± 5 | 44 |
| KE-30 | 30 | 55 ± 2 | 13 ± 2 | 42 ± 2 | 85 ± 5 | 44 |
| KE-40 | 40 | 70 ± 3 | 13 ± 2 | 55 ± 3 | 100± 5 | 44 |
| KE-50 | 50 | 72 ± 3 | 13 ± 3 | 60 ± 3 | 135 ± 5 | 44 |
| KE-65 | 65 | 92 ± 4 | 15 ± 3 | 74 ± 4 | 140 ± 5 | 44 |
| KE-80 | 80 | 108 ± 4 | 15 ± 3 | 89 ± 4 | 165 ± 5 | 44 |
| KE-100 | 100 | 142 ± 4 | 15 ± 3 | 122 ± 4 | 165 ± 5 | 44 |